Author Topic: New design API 525... UPDATE.. METAL IN..PCBs IN (Read 17519 times)

peter purpose · « **on:** September 14, 2009, 12:04:02 PM »

Gents,
I've got a new design 525 that does away with most of the wiring. Only the pots and transformers need to be wired to the pcb.
Provision for a Lundahl 1540, or differential input.
Any interest?

Biggun.. http://lazpro.com/nu525big.jpg

[silent:arts] · « **Reply #1 on:** September 14, 2009, 12:59:22 PM »

cool Peter. any chance for a stereo link switch?

Svart · « **Reply #2 on:** September 14, 2009, 01:10:50 PM »

wow. I'm interested

peter purpose · « **Reply #3 on:** September 14, 2009, 01:21:35 PM »

Quote from: [silent:arts] on September 14, 2009, 12:59:22 PM

cool Peter. any chance for a stereo link switch?

Sure... as long as the 120R resistor can be put between a pair of pin6s on your backplane.

conleycd · « **Reply #4 on:** September 14, 2009, 01:24:26 PM »

Hi Peter,

I'm very interested. I have the first generation ones but I've only stuffed the resistors - so I'd be interested in at least 2 of these updated boards.

Are they available yet?

CC

peter purpose · « **Reply #5 on:** September 14, 2009, 01:32:41 PM »

Quote from: conleycd on September 14, 2009, 01:24:26 PM

Are they available yet?

Not yet.... just checking interest at the mo.

briomusic · « **Reply #6 on:** September 14, 2009, 01:50:02 PM »

this might get me over my grief over the sold out forssell opticals....

only temporarily though!

q: is this going to be a kit as the old one? after wrangling an iec connector into a cheap and bendy steel case, I promised myself today: the next 3 projects no metalwork .

SSLtech · « **Reply #7 on:** September 14, 2009, 01:51:09 PM »

Well, thrash me nadger and bottle me kippers!

-That looks fantastic!

-Bring one along to the knees up in November for me to assess with my own beadies, will ya!

Keef

peter purpose · « **Reply #8 on:** September 14, 2009, 02:29:10 PM »

Roger roger keefypoo.

peter purpose · « **Reply #9 on:** September 14, 2009, 02:29:51 PM »

Quote from: briomusic on September 14, 2009, 01:50:02 PM

q: is this going to be a kit as the old one?

If there's enough interest.

ultra-alex · « **Reply #10 on:** September 14, 2009, 03:00:53 PM »

oh yes, i´am interested!!!

edit: a pair of course...

kazper · « **Reply #11 on:** September 14, 2009, 03:16:08 PM »

Looks sharp, Good job Peter as always.

It looks like you dropped the Attack mod?

Greg · « **Reply #12 on:** September 14, 2009, 03:19:31 PM »

I've built one of the 1st generations... use it all the time. I might be interested in a 2nd, but have to think it over. Hope you ditched the attack mod cause it's busted.

[silent:arts] · « **Reply #13 on:** September 14, 2009, 03:24:28 PM »

Quote from: peter purpose on September 14, 2009, 01:21:35 PM

Quote from: [silent:arts] on September 14, 2009, 12:59:22 PM
cool Peter. any chance for a stereo link switch?

Sure... as long as the 120R resistor can be put between a pair of pin6s on your backplane.

this is possible

:
there are jumpers between each slot to connect pin6 together, no problem to install a resistor there:

peter purpose · « **Reply #14 on:** September 14, 2009, 04:13:04 PM »

No problem then.

peter purpose · « **Reply #15 on:** September 14, 2009, 04:13:53 PM »

Quote from: kazper on September 14, 2009, 03:16:08 PM

It looks like you dropped the Attack mod?

Yes.

[silent:arts] · « **Reply #16 on:** September 14, 2009, 04:18:13 PM »

if stereo is switchable: two for me please

Biasrocks · « **Reply #17 on:** September 14, 2009, 04:30:58 PM »

I'm interested.

Mark

ChrioN · « **Reply #18 on:** September 14, 2009, 05:02:29 PM »

Looks very good. Interested in two.

jsteiger · « **Reply #19 on:** September 14, 2009, 09:35:31 PM »

Nice work as always Peter. I would be in for a pair.

News:

Author Topic: New design API 525... UPDATE.. METAL IN..PCBs IN (Read 17519 times)