Welcome to GroupDIY!
how did you guys mount the mk47 safely to the siderails? any examples with pics?
Ok, so it's the female binder that's out of stock. Is that something that I can add later when they are back in stock, or easily find somewhere else?
We do not plan on restocking the female cable-mount binder. Binder used to sell this connector direct through their EU website, but I'm not sure if they still do.You may have to inquire about distributors in your country.http://www.binder-connector.deBinder 691-series female cable-mount 7-pin connectorPart # 09 0042 00 07
These little guys are your friends: Mouser PN: 534-621I used 2 of them on one of my MK7s along with short 4-40 flat undercut brass screws. On this build, all the wiring is solid-core silver teflon, and it's STIFF, which really helps keep the board in place. In fact, I can remove the brackets, and the PCB is still held in place solidly under the support of only the wiring.Now, mounting the G7 takes a little more imagineering.Using parts that I had lying around... This one is fun. Looks a little steam-punk, but we like that kind of thing around here, right?There are plenty of ways this could be done better, but this improvised approach works in a pinch and provides some adjust-ability.[You will notice that the side rails are all bent outta shape. That's the result of my testing procedures...of course, they still work fine. A trip to the vise will straighten them back up again.]
Skylar, have you ever considered making a clone U87 body and capsule to go with builds like this?http://www.groupdiy.com/index.php?topic=47350.0
There are 3 remaining EQU47 mic bodies in stock!
There are 3 remaining EQU47 mic bodies in stock!Save $75 when you purchase one of the remaining three AND a Q47-D capsule.Just place both products in your cart and enter the code: LAST3OMGWTFBBQ1http://equinoxsystems.net/2012/02/3-equ47-mic-bodies-left-bundle-deal/
Quote from: Skylar on February 27, 2012, 10:24:31 PMThere are 3 remaining EQU47 mic bodies in stock!... which so begs the inevitable question: will there be another run?