reading this forum, and following many arguments, I wanted to try to build my Mic
What I did is to find the the schematic I needed and I found the Schoeps one and the Alice one.
Ok good, i realized the schematic you find here in attachment.
I have not a TSB capsule yet, so that I used a normal Elected from "shop". Its quality is not certainly the TSB but it works (jsut to see if everything is up and running )
Well: the circuit works and I'm happy.
What is not what I expected is: the noise. The "ffffffffffff" to be clear.
It's not enormous but it is up there.
Initially I thought it was the capsule. So that I tried to connect the point C to B instead of to A.
No way out.
At this point I tried to short circuit C to ground bypassing the capsule. No way out. The "ffffffff" stays.
I compared it with my SE2200A. Connecting the SEc the "space is opened". Connecting the circuit of the schematic, the "ffff" is like "mist in the space" ...
I mean: the rustle is present. It's not unmanageable but its higher than the noise of my SE2200A.
I'm wondered if there is anything in the schematic that can lead to the fine bue hearable "ffff" in my realization
I'm wondered if anybody can help to solve this issue please.
[EDIT] Edited message for rephrasing. Sorry for my English[/EDIT]
What I did is to find the the schematic I needed and I found the Schoeps one and the Alice one.
Ok good, i realized the schematic you find here in attachment.
I have not a TSB capsule yet, so that I used a normal Elected from "shop". Its quality is not certainly the TSB but it works (jsut to see if everything is up and running )
Well: the circuit works and I'm happy.
What is not what I expected is: the noise. The "ffffffffffff" to be clear.
It's not enormous but it is up there.
Initially I thought it was the capsule. So that I tried to connect the point C to B instead of to A.
No way out.
At this point I tried to short circuit C to ground bypassing the capsule. No way out. The "ffffffff" stays.
I compared it with my SE2200A. Connecting the SEc the "space is opened". Connecting the circuit of the schematic, the "ffff" is like "mist in the space" ...
I mean: the rustle is present. It's not unmanageable but its higher than the noise of my SE2200A.
I'm wondered if there is anything in the schematic that can lead to the fine bue hearable "ffff" in my realization
I'm wondered if anybody can help to solve this issue please.
[EDIT] Edited message for rephrasing. Sorry for my English[/EDIT]