PRICE: $2000 + shipping
Up for sale is a pair of ATC SCM-10-2 active studio monitors. They are bi-amplified at HF 50w RMS, Mid/LF 200w RMS. They are a matched pair with consecutive serial numbers. ATC makes the best monitors bar none. I have a 5.1 set of SCM150's, a pair of SCM20's and these. These keep the same pedigree. Full even sound and stereo imaging that can't be beat. You really need to here it if you haven't. It will bring the phrase "placing it in the mix" to an all new level. You can hear every bit of that pan knob. Play one of your favorite CD's through them and you will be amazed at what you can hear and it's spatial imaging. These were for an editing suite. I have down-sized and don't have that suite anymore. So these are redundant for me now. These are hard to come by and this specific model isn't made any more. I believe replaced with the SCM16. These are about like new condition. There is one small dimple on the bottom back rounded edge of one speaker. You don't see it. Nor will your customers. Everything else is like new. I have the original foam inserts from the box for packing. I don't have the boxes, so I will have to get new ones. This will ship in 2 boxes and they are heavy for small speakers at over 34lbs each. I'll get shipping as cheap as I can but understand there is not a lot I can do about it.
SPECS:
"The ATC SCM 10 has been designed to reproduce music from all sources including high bit rate audio formats. Each SCM 10 has its own on-board ATC proprietary twin channel amplifier with Grounded Source® output stages and multiple power supply. Its total of 250 watts is capable of playing up to 105db with impressive bass performance."
Drivers : HF 25mm, Mid/LF 125mm
Amplifier Output : HF 50w RMS, Mid/LF 200w RMS
Amplitude Linearity (±2dB) : 70Hz-17kHz
Cut-off Frequencies (-6dB, free-standing) :
45Hz, 22kHz
Horizontal Dispersion : ±80°, Coherent
Vertical Dispersion : ±10°, Coherent
Max. Continuous SPL (1 meter) : 105dB
Crossover Frequency : 2.8kHz
via active crossover with time (phase) alignment
Input Sensitivity : 1V Input Connector : Balanced male XLR
Input Impedance : > 10kΩ
Overload Protection : Active momentary
gain reduction (Both amplifiers)
Power Requirements
Voltage : 100, 115, 230 (factory set)
Frequency : 50/60Hz
Power : Nominal 50 Watts, driven 250 Watts
Dimensions (HxWxD) : 390 x 230 x 310mm
Weight : 15.5kg / 34lbs
Local pickup available.
