« previous next »
Pages: [1]

Author Topic: Benchtop DMM  (Read 272 times)

dax

  • Member
  • Posts: 11
    • Austin
Benchtop DMM
« on: July 20, 2012, 11:44:20 PM »
Hi All,
Anyone have expereince using this DMM
Tenma Part #: 72-1020
http://www.mcmelectronics.com/product/TENMA-72-1020-/72-1020

I currently am using a Fluke 115 and would like a benchtop one to use also and sit on top my scope. 

thanks
Logged

sahib

  • Member
  • Posts: 2449
    • Glasgow - UK
Re: Benchtop DMM
« Reply #1 on: July 21, 2012, 11:12:58 AM »

I have not used it but Tenma is a good make. I have two signal generators made by them.
Logged

sodderboy

  • Member
  • Posts: 1632
    • Long Island
Re: Benchtop DMM
« Reply #2 on: July 22, 2012, 08:00:06 AM »
I have a Tenma hot air station and it works well for my fledgeling SMD practicing so I have no other comparison.  I have used their scopes in a few studios and they were of good build quality.
That meter is only $189 with source code A207AD.
Mike
Logged
Pages: [1]
« previous next »