META - The G7 microphone

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

gyraf

Well-known member
Staff member
GDIY Supporter
Moderator
Joined
Jun 4, 2004
Messages
11,857
Location
Aarhus, Denmark
Here's a list of G7-related threads.

http://groupdiy.com/index.php?topic=55241
Official G7 microphone help thread

http://www.groupdiy.com/index.php?topic=4430
G7 what does it REALLY sound like?

http://www.groupdiy.com/index.php?topic=7098
G7 in action - Heavy Metal - with soundclips from Lindell..

http://www.groupdiy.com/index.php?topic=7305
G7 with M7 sound? - on using a Gefell M7 capsule in the G7

http://www.groupdiy.com/index.php?topic=4990
A little G7 Assistance Please. - Checking that the tube's allright..

http://www.groupdiy.com/index.php?topic=566
G7 mic ... Big hum for now

http://www.groupdiy.com/index.php?topic=1951
Still troubleshooting G7 ...WORKS NOW

http://www.groupdiy.com/index.php?topic=4762
strange G7 capsule polarization voltages

http://www.groupdiy.com/index.php?topic=2990
G7 mic problems.

http://www.groupdiy.com/index.php?topic=6983
G7 psu parts and schematic - confused

http://www.groupdiy.com/index.php?topic=1655
need help with G7 psu please

http://www.groupdiy.com/index.php?topic=1117
EF86 and capsule options for a G7

http://www.groupdiy.com/index.php?topic=3568
G7 parts source

http://www.groupdiy.com/index.php?topic=5428
Another parts list for the G7

http://www.groupdiy.com/index.php?topic=4674
G7 Mic body(complete)

http://www.groupdiy.com/index.php?topic=4770
My Pipe

http://www.groupdiy.com/index.php?topic=3876
My G7 Capsules tests !

http://www.groupdiy.com/index.php?topic=3777
G7 pattern switch pop/bang/thump...

http://www.groupdiy.com/index.php?topic=2378
G7 - What bodies to use (& what not to use...)

http://www.groupdiy.com/index.php?topic=3655
My G7 mic exaust my tubes..

http://www.groupdiy.com/index.php?topic=3280
7 pin XLR connectors

http://www.groupdiy.com/index.php?topic=2500
G7 finished!!!!!!

http://www.groupdiy.com/index.php?topic=1839
Wire an OEP A262A3E in a G7?

http://www.groupdiy.com/index.php?topic=5066
too many G7's...so here is another one finished ;-) - Nice pics, but also about using the OEP transformers in the G7 - serial or parallel connection - for different sound.

http://www.groupdiy.com/index.php?topic=1589
Valve Mic Cable for G7?

http://www.groupdiy.com/index.php?topic=721
G7 PSU +160V ?

http://www.groupdiy.com/index.php?topic=4922
Looking for 1G resistors for the Dorsey Oktava MC012 mod

http://www.groupdiy.com/index.php?topic=4929
1G ohm

http://www.groupdiy.com/index.php?topic=5171
Resistor noise.... On resistor types for the 1G resistors.

http://www.groupdiy.com/index.php?topic=257138
Another g7 ground question!!! - on grounding the circuit.

http://www.groupdiy.com/index.php?topic=31346
First Project problem with G7

http://www.groupdiy.com/index.php?topic=24857.0
G7 Problem with PCB - about a possible short-circuit problem with ready-made PCB's

http://www.groupdiy.com/index.php?topic=42136.0
G7 noise troubleshooting session. [Solved] - about possible problems and troubleshooting

Jakob E.
 
Back
Top