Toshiba Type B ribbon mic
Top of the line; very hi-fi, precision engineering; solid.
This one needs re-tensioning and a cable. Comes with a very nice hard case - Canare Star Quad and a Neutrik XLR connector incl.
€950
Rare Matsushita Condenser Mic
No model number found.
Beautiful craftsmanship: capsule looks the job. Works and sounds great. Unfortunately, a ring has come loose on one of the mounts; a spot weld or a flash weld should make it right. It’s usable in its present state —it’s almost imperceptible but not ideal for proper
€690
Fostex M-88RP
Bi-directional printed ribbon mic
€745
Peak technology: subtle but takes high SPL. This black version is from the initial limited run.
AIwa VM-20 ribbon mic
€850
The last in the line of high-class AIwa ribbons. Pristine condition. Tested good; needs a new cable.
A length a fresh Canare Star Quad and a Neutrik connector will be included —as well as a velvet sock (Toshiba brand) and a hard case (from an AIwa VM-15).
National (Panasonic) WM-400
dynamic mic, not fragile
€260
-Rare to encounter out in the wild, Classy Japanese design, super solid build; comes with measurements and a proper case
-Performs something like a cross between the Sony C-350 and the Sennheiser MD-421
Matsushita VM-1 (Prototype?)
Large ribbon, massive magnets
€400
The model section on the badge is unstamped. Dated 1952. Heavy. The ball joint mount needs a bit of fidgeting as it mostly slips.
Ribbon looks OK but it’ll need re-tensioning. Comes with a beautiful wooden case.
Vesta RV-1 Spring Reverb
€430
Pure dubby goodness w/ EQ and limiter. 120V
DBX 1024
half-rack buffer/isolator/interface
€85
-Ready for anything.
-This one breaks my heart for some reason; it’s very definitely over-engineered but it makes no sense to hold on to it since it’s 120V only (no European version was on produced).
Arnold W1390-M active fader
€150
-Danner format, Tuchel connector, Neumann W444 replacement, +24V
-Clean, excellent condition, smooth action
-feels very solid with a pair of chonky Pikatron transformers inside
~~~~~
Shipping from Ireland, plz take that into consideration. Feel free to PM me for an exact quote to your location.
No question will remain unanswered. I’ve been buying/selling gear for many years and I always strive to maintain a copacetic exchange.
Lastly, I’ll most likely add a few more random items to this post so stay tuned. Cheers!
Top of the line; very hi-fi, precision engineering; solid.
This one needs re-tensioning and a cable. Comes with a very nice hard case - Canare Star Quad and a Neutrik XLR connector incl.
€950
Rare Matsushita Condenser Mic
No model number found.
Beautiful craftsmanship: capsule looks the job. Works and sounds great. Unfortunately, a ring has come loose on one of the mounts; a spot weld or a flash weld should make it right. It’s usable in its present state —it’s almost imperceptible but not ideal for proper
€690
Fostex M-88RP
Bi-directional printed ribbon mic
€745
Peak technology: subtle but takes high SPL. This black version is from the initial limited run.
AIwa VM-20 ribbon mic
€850
The last in the line of high-class AIwa ribbons. Pristine condition. Tested good; needs a new cable.
A length a fresh Canare Star Quad and a Neutrik connector will be included —as well as a velvet sock (Toshiba brand) and a hard case (from an AIwa VM-15).
National (Panasonic) WM-400
dynamic mic, not fragile
€260
-Rare to encounter out in the wild, Classy Japanese design, super solid build; comes with measurements and a proper case
-Performs something like a cross between the Sony C-350 and the Sennheiser MD-421
Matsushita VM-1 (Prototype?)
Large ribbon, massive magnets
€400
The model section on the badge is unstamped. Dated 1952. Heavy. The ball joint mount needs a bit of fidgeting as it mostly slips.
Ribbon looks OK but it’ll need re-tensioning. Comes with a beautiful wooden case.
Vesta RV-1 Spring Reverb
€430
Pure dubby goodness w/ EQ and limiter. 120V
DBX 1024
half-rack buffer/isolator/interface
€85
-Ready for anything.
-This one breaks my heart for some reason; it’s very definitely over-engineered but it makes no sense to hold on to it since it’s 120V only (no European version was on produced).
Arnold W1390-M active fader
€150
-Danner format, Tuchel connector, Neumann W444 replacement, +24V
-Clean, excellent condition, smooth action
-feels very solid with a pair of chonky Pikatron transformers inside
~~~~~
Shipping from Ireland, plz take that into consideration. Feel free to PM me for an exact quote to your location.
No question will remain unanswered. I’ve been buying/selling gear for many years and I always strive to maintain a copacetic exchange.
Lastly, I’ll most likely add a few more random items to this post so stay tuned. Cheers!
Attachments
Last edited:
