MEQ stylee thingy finished

[ioaudio]

:thumb:

 

[saint gillis]

try this changes for frequencies
i used this for my meq500 prototype [scroll down]
you can calculate the cap´s values
http://www.pronine.ca/lcf.htm

i do not understand the limitations with the high boost - purusha had the same problem

-max

Great correction, especially for the low section that contained some strange things...
Concerning the mid section here are the simulation results :
3000 > 3350
4000 > 5000
5000 > 6800
7000 > 8500

Do you guys think we should keep that or tweak a bit those frequencies to be closer to thoose written on the panel...?

 

[saint gillis]

I don't have an original unit but I saw in a plug-in emulation that it matches the indicated frequencies..
Here are the caps values I've found :