It will likely be surface mount though, in that case I might just have them built up and provide them completed
ruckus328 said:Gem, sorry for the delay, I have not done any further development yet on this but it is on my schedule in about a month. I did plan to get back with the Eng at LT I'm working with this week though to try and get the HV flyback portion rolling. I "think" it will probably end up being a stock off the shelf 1:10 step up I'll be using, that is one of the things I'll be discussing with them though.
People always want to compare our turnkey rack and PSU kit to a 10 space VPR rack, which is only a little more money. There are many threads that compare and explain the differences. They may be hard to find though. Mostly, our rack is 11 space not 10 and the PSU is a monster in comparison. Our PSU can run an 11 space rack full of VPR type modules running the full 130mA consumption on the bipolar 16V rails. Also, it can simultaneously run an 11 space rack full of 51x type modules running the full 130mA consumption on the bipolar 24V rails. More than double the girth of the typical on-board VPR type PSU. So, we have all the length and girth that they are lacking.
Enter your email address to join: