Jazzy_Pidjay
Well-known member
Hi !!
During my first test i have put a 3V/30mA white led
in my G7, in parallel with the heater with a resistor of 135 Ohm.
but the led burned after about 10 hours :evil:
the question is :grin:
do i put my led in serial or in parallel ?
if it's in serial ? do i increase my psu heater voltage to 9,3v ???
thanks
During my first test i have put a 3V/30mA white led
in my G7, in parallel with the heater with a resistor of 135 Ohm.
but the led burned after about 10 hours :evil:
the question is :grin:
do i put my led in serial or in parallel ?
if it's in serial ? do i increase my psu heater voltage to 9,3v ???
thanks