Hello,
I'm offering conversion kits for Gefell MV692, MV691, PM750 and PM860 microphones.
This kit allows you to convert Gefell microphones to a common phantom P48 standard.
Conversion kit includes XLR socket, XLR insert and tiny PCB module (48-12V converter).
The socket is made of brass and precisely machined in our shop and nickel plated to prevent oxidation.
Electrical changes are made in the same manner as Gefell do, and even more elegant - there is tiny PCB module that converts and filters phantom power to desirable 12V voltage. The circuit is very reliable and noise-free.
Since the microphone converted, you don't need to mess around with external PSU and tricky cables. Connect microphone and turn phantom power on.
You can find some additional info on my FB page:
https://www.facebook.com/MicrophoneShop/
Installation instructions here:
http://microphone-shop.com/MV692%20instruction.pdf
Besides, I can answer any specific questions. Installation requires wiring/soldering skills, so if you are not handy with iron, you can send the microphone to my shop. Also, you can install the kit in your local repair shop.
Price per one kit - 35$.
Shipping cost - 5$(+1.5$ each additional).
STOCK: 10pcs
I'm offering conversion kits for Gefell MV692, MV691, PM750 and PM860 microphones.
This kit allows you to convert Gefell microphones to a common phantom P48 standard.
Conversion kit includes XLR socket, XLR insert and tiny PCB module (48-12V converter).
The socket is made of brass and precisely machined in our shop and nickel plated to prevent oxidation.
Electrical changes are made in the same manner as Gefell do, and even more elegant - there is tiny PCB module that converts and filters phantom power to desirable 12V voltage. The circuit is very reliable and noise-free.
Since the microphone converted, you don't need to mess around with external PSU and tricky cables. Connect microphone and turn phantom power on.
You can find some additional info on my FB page:
https://www.facebook.com/MicrophoneShop/
Installation instructions here:
http://microphone-shop.com/MV692%20instruction.pdf
Besides, I can answer any specific questions. Installation requires wiring/soldering skills, so if you are not handy with iron, you can send the microphone to my shop. Also, you can install the kit in your local repair shop.
Price per one kit - 35$.
Shipping cost - 5$(+1.5$ each additional).
STOCK: 10pcs