Well here it is. ML12 PSU Gerbers. I Recommend ordering pcb with 2oz copper traces. This is intended for open source project. Not for commercial use.
5-5-24 Updated BOM and silkscreen on Gerbers to reflect alternate U4. TL783 high voltage regulator adjustable output range of 1.25v to 125v. This part is better suited to supply 48 phantom volts compared to the standard LM317 which only is adjustable from 1.2v to 37v. Instead I recommend using the TI LM317HV which is capable of supplying 1.5 A or more currents over a 1.25-V to 57-V output voltage range. If using TL783 *Omit* D8* & C21*.
5-5-24 Updated BOM and silkscreen on Gerbers to reflect alternate U4. TL783 high voltage regulator adjustable output range of 1.25v to 125v. This part is better suited to supply 48 phantom volts compared to the standard LM317 which only is adjustable from 1.2v to 37v. Instead I recommend using the TI LM317HV which is capable of supplying 1.5 A or more currents over a 1.25-V to 57-V output voltage range. If using TL783 *Omit* D8* & C21*.
Attachments
-
ML12 PSU Schematic.jpg870 KB · Views: 0
-
ML12 PSU BOM.txt3.4 KB · Views: 0
-
ML12 PSU Gerbers.zip290 KB · Views: 0
-
ML12 PSU Front Silkscreen.jpg592.4 KB · Views: 0
-
ML12 PSU Back Silkscreen.jpg439.3 KB · Views: 0
-
ML12 PSU Components.jpg547.4 KB · Views: 0
-
ML12 PSU Components 3D.jpg356.9 KB · Views: 0
Last edited: