Phew....I just racked my Neve clone. Special Thanks to Tomelectro for the odd screws and Greg for the buss bar grounding idea, as well as Fabio and Greg for their PCB's.
I went all out on this one, with Silver Teflon wire on all audio lines, 16 and 18 AWG Silver Teflon grounds, Grayhill switches and DI's with 2SK170's and huge Wima-MKP 1uF cap. The first 2 channels are new 283's and trhe 3rd was an old original with original xfmrs too.
I really tried to be neat on wiring but the gain wires are really rough to make clean. It was my first FPE job and those small characters are hard to make clean and I made an obviouus mistake while finiishing work on the file at 5AM. But overall this is the fiirst project that I am really happy with.
I went all out on this one, with Silver Teflon wire on all audio lines, 16 and 18 AWG Silver Teflon grounds, Grayhill switches and DI's with 2SK170's and huge Wima-MKP 1uF cap. The first 2 channels are new 283's and trhe 3rd was an old original with original xfmrs too.
I really tried to be neat on wiring but the gain wires are really rough to make clean. It was my first FPE job and those small characters are hard to make clean and I made an obviouus mistake while finiishing work on the file at 5AM. But overall this is the fiirst project that I am really happy with.