Harpo
Well-known member
Different pinout http://www.datasheetcatalog.org/datasheets/70/193037_DS.pdfjosh said:I'm not sure if I have the correct component in the 1A Bridge position.
Pic attached.
The text on it is DB102 V718
Depends on your transformers secondary voltage. Differential between raw DC in and +/-15V DC out times current load is transfered to heat.Also, do you think I should heat sink the 78/7915's?
Would it matter if they are attached to the same sink?
Use insulation kits when attaching (especially to same condusting) heatsink. 7815 has 0V reference voltage potential at heat fin that might cause a ground loop, 7915 has input voltage potential at heat fin that could get shorted out to reference voltage, maybe blowing your rectifying diodes.