mikeyB
Well-known member
Im wanting to know what is a good/safe type of connector to use with valve preamp equipment. These are to connect external power supply into 19" rack units. Typical values - say heaters up to 5A, HT - 350V@ 250mA, maybe other (relay supply) etc. PSU located between 1 and 2 metres from rack.
Any typical/standard connector type used for this application? - it will be virtually permanent install, with occasional need to travel.
Thanks in advance
Any typical/standard connector type used for this application? - it will be virtually permanent install, with occasional need to travel.
Thanks in advance