DIY Gate

[Chuck78]

[quote author="gyraf"]Here's what I found till now - the PCB layout:

http://groupdiy.twin-x.com/albums/userpics/10004/Gyraf_NoiseGate_Layout.PDF

I'll keep searching for the schematic..

This gate is based on a FET attenuator. It has key input -filters and -listen as well as hard bypass. Audio only passes FET and one 5534 - thus working unbalanced, but with very little sonic side-effects.

Controls are threshold-attack-hold-release-HPF-LPF-keylisten and bypass.

Action is indicated by a single red/green LED (that works pretty well, if I may say so..)

Jakob E.[/quote]

Just wondering if you had come across those schems yet.
Thanks

 

[gyraf]

still looking - I haven't forgotten or given up yet..

Jakob E.

 

[Ptownkid]

Has anyone built Jakobs gate?

 

[babyhead]

Somewhere in the Forssell Opto thread there was mention of modifying that project for use as a gate... IIRC.

 

[khstudio]

Gyraf, that looks cool, thank you. :thumb:

I am VERY interested in a good/HIGH quality noise gate that doesn't kill the original signal - for drums, guitar, rap vocals or voice overs, etc...

Schematic???

I see a couple of trimers for adjusting - Could you give us some instructions on how to adjust these :grin:

If this one doesn't pan out, what else is there worth building or buying?

Thanks,
Kevin

 

[Ptownkid]

This thread is from 2004, so I'm not sure if the schem was eevr found, but I am interedted in some inexpensive gates for drums.

Hopefully some people "in the know" chime in.

 

[tony dB]

WRONG POSTED : Schematic found, never build it so far...
mail me at (removed) and I'll send you what I've got.


EDITED : I mistakenly had the pcb-layout taken for schematic, so I don't have it