Hey guys,
I just had a few questions for the G7 builders and specially the G7 master Jakob... and please pardon my ignorance if questions are dumb..
1- on the Gyraf website I noticed that the power transformers for 220 are for 9v and 15v and for 110 they are 9V and 7.5V.. any special reason why that is??
2- Does anybody in the US has a part number for some of these 110 transformers.. I"m not too sure about the ones I found on the neward site. Part #95B8917 and #95B8919
3- I'm mounting the tube inside the mic, unlike duka.. So I was thing about making some vent holes on the body of the mic so the heat would get out. Is that a good idea?. Or should I not worry about the tube heating too much?...
4- I was also thinking about a 7way switch for the pattern select.. I was wondering what the values would be... is there an formula that I can use??
Position 1 for omni, 4 for cardioid and 7 for bipolar, and the others inbetween...
Thanks guys,
Gil