matthias
Well-known member
Hi,
I finished my G9 a while ago and today I was coming back to it...
I made some tests with the rightmark audioanalyzer tool
(http://audio.rightmark.org/products/rmaa.shtml)
regarding the frequency range...
I have used OEP-trafos at the input and lundahl at the output..
here's a test using the xlr-in (signal gets thru the oep input transformer)
it seems that OEP causes a slight shelf to the high frequencies
edit : sorry I don't have this pic anymore...
and here one test without the oep, thru the jack at the front...
edit : sorry I don't have this pic anymore...
of course the low cut switch is in its off-position
and I did the test on both channels, they behave exactly the same...
maybe someone of you with a G9 could do this test...
thanks,
mat
I finished my G9 a while ago and today I was coming back to it...
I made some tests with the rightmark audioanalyzer tool
(http://audio.rightmark.org/products/rmaa.shtml)
regarding the frequency range...
I have used OEP-trafos at the input and lundahl at the output..
here's a test using the xlr-in (signal gets thru the oep input transformer)
it seems that OEP causes a slight shelf to the high frequencies
edit : sorry I don't have this pic anymore...
and here one test without the oep, thru the jack at the front...
edit : sorry I don't have this pic anymore...
of course the low cut switch is in its off-position
and I did the test on both channels, they behave exactly the same...
maybe someone of you with a G9 could do this test...
thanks,
mat