Ladies and Gents,
I'm currently working on a mic pre front end with the aim of offering the PCB's to GroupDiy members.
The function is to actually sit in front of the Mic Preamp itself and offer the following functions:
1 - Full remote control, from either switches or logic (anything can that generate 3V+)
2 - Tried and tested EMI Filter
3 - Pad (-26dB)
4 - Phantom Power (on/off)
5 - Highpass filter (120Hz and above)
6 - Phase.
The Schematic can be found at: http://www.tendolla.com/design/micfrontendpcb/micfrontendschem.png
Feedback please?
I'm currently working on a mic pre front end with the aim of offering the PCB's to GroupDiy members.
The function is to actually sit in front of the Mic Preamp itself and offer the following functions:
1 - Full remote control, from either switches or logic (anything can that generate 3V+)
2 - Tried and tested EMI Filter
3 - Pad (-26dB)
4 - Phantom Power (on/off)
5 - Highpass filter (120Hz and above)
6 - Phase.
The Schematic can be found at: http://www.tendolla.com/design/micfrontendpcb/micfrontendschem.png
Feedback please?