Update to psu recap as promised ................sorry about the grubby workbench....very busy at the mo!
All the caps were replaced, the dc smoothing ones with 130 deg low esr higher voltage ,quality caps
The originals although 105 deg types,look like cheepie chinese ones
sorry didnt take any pics of the originals,they were binned rapidly
the finished article
This was a tight fit !
The new caps were 12.5 mm dia,the originals 10mm
I mounted the tight packed ones slightly raised off board with silicon sleeving
on the legs to prevent shorts and give extra support,some juggling required !
And had to bend the heatsink on the rec diodes to allow space.
Pack em in !
And finally finished !!
A blob of silicon here an there, to stop any excess movement
Works a treat,all digital interference garbage vanquished.
total cost about £18.00
If your DDX is 5 yrs plus do yourself a favour !!
you'll be glad you did