New Soul Rebel
Well-known member
- Joined
- Mar 25, 2010
- Messages
- 135
Look, for gods sake I must have had too much beer last night. I blew the 48v fuse because I didn't switch the mains off when I plugged a mod in this morning. what a twat.
M
M
New Soul Rebel said:Look, for gods sake I must have had too much beer last night. I blew the 48v fuse because I didn't switch the mains off when I plugged a mod in this morning. what a twat.
M
Very interesting to learn that Aluminum can actually act as an insulator in this situation. (unless i'm off base)
[silent:arts] said:you need to insulate all regulators, I would even add: in all PSUs!
exploding C8: are you sure you did solder it with the correct polarity ?
there is nearly no other way to get it smoke.
easiest way to disable the 48V is to not connect the 48V secondary of the PSU transformer.
kepeb said:just use standard red 5mm
anode to ground on - rails, ground cathode on + rails
+48v = 4k7
+-24v = 2k2
+-16v = 1k5
edit: not taking credit btw, just passing it along
Enter your email address to join: