Hello everybody,
i need to build a transfomerless active splitter.
It's going to be 2 or 3 ways didn't decide yet. 12 INs into 24 or 36 OUTs.
Transformerless because guys i'm building for want the cheapest solution possible.
Main purpose is for splitting mic signals to different consoles. Mostly for live situations.
Obviously each output should be isolated.
I was thinking about a mic preamp stage followed by balanced driver amplifiers in parallel.
I would use the splitter preamp to set the mic gain to have a wider sound to noise ratio.
What do you think about it?
If someone has a ready to use circuit would be great!
Thank you
Omar
i need to build a transfomerless active splitter.
It's going to be 2 or 3 ways didn't decide yet. 12 INs into 24 or 36 OUTs.
Transformerless because guys i'm building for want the cheapest solution possible.
Main purpose is for splitting mic signals to different consoles. Mostly for live situations.
Obviously each output should be isolated.
I was thinking about a mic preamp stage followed by balanced driver amplifiers in parallel.
I would use the splitter preamp to set the mic gain to have a wider sound to noise ratio.
What do you think about it?
If someone has a ready to use circuit would be great!
Thank you
Omar