rafafredd
Well-known member
So, I know that there are many many threads about passive summing networks out there... but as one of the menbers here posted a link where I found some info on my V475/2C modules, I thought now was the time to start the passive mixer I always wanted to build with those modules. The problem is that I need your help, because I can´t even read the german paper. It´s here:
http://www.audiosonic.de/pdf/V475.pdf
So, could someone translate the important specs for me, like input impedance, gain, etc... I tried to guess, but I wasn´t exactly succesfull, I think.
If you can give me any directions about the summing network to put before this card, it´s very welcome. I´m still studying the many NYDave notes about passive network design and I´m going to try a simple balanced network, input attenuator, then a panpot, then directly to L and R. No inserts, no auxialiars, no nothing.
Thanks for the link, and thanks for any input. :thumb:
http://www.audiosonic.de/pdf/V475.pdf
So, could someone translate the important specs for me, like input impedance, gain, etc... I tried to guess, but I wasn´t exactly succesfull, I think.
If you can give me any directions about the summing network to put before this card, it´s very welcome. I´m still studying the many NYDave notes about passive network design and I´m going to try a simple balanced network, input attenuator, then a panpot, then directly to L and R. No inserts, no auxialiars, no nothing.
Thanks for the link, and thanks for any input. :thumb: