MK7 - tube mic project

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Turns out my friend wants two of these aswell. Since its alot easier if i order for the both of us, and as long as im quick enough with payment, its ok if i order four sets right?

Will there only be 2x25 sets made for these or might there be more in the future available if im not quick enough on these?

Thanks for doing this btw!
/J

 
working on a successor transformer, lets call it bv7 - rev2 for now , using available laminations from magmet usa (thanks marik for the samples!)
 
mk7_pcb_protobuild.jpg
 
hi max,
once again great work! (hey no thumbs or beers! ???...i'd put some if we could).

question: i can't seem to figure out how the pcb(s) would mount into a mic body tube.  can you explain the mechanics and type of fastening which can be used?
i do see a screw hole on the side of the amp PCB (between ioaudio and MK7) though.

thanks for all your efforts!
-grant
 
If I read correctly, there was to be no waiting list, right?

First come first serve in the BM when available? Right?

If this has indeed changed I'm in for at least a kit.

 
yes, no waiting list.  i will make a thread with payment details at the black market and post a link here.

here are two pics showing the pcb mounted in the thomann mic body:


mk7_pcb_protobuild1.jpg

mk7_pcb_protobuild2.jpg


 
Back
Top